Used Equipment in "Like New" Condition. Fully Functional. Standard Signs of Use.
Hammer Strength Select Leg Extension:
The Hammer Strength Select Leg Extension is a fundamental part of the strength training progression. All adjustments are accessible from the seated position, and the adjustable start position provides five different starting points. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.
| Size (L x W x H) | 47" x 41" x 64" (metric cm: 119 x 104 x 163) |
| Recommended Live Area | 89" x 65" x 64" (metric cm: 226 x 165 x 163) |
| Machine Weight | 570 lb (368 kg) |
| Weight Stack(s) | 295 lb (138 kg) |
| Max User Weight | 300 lb (136 kg) |
| Cables | 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications |
| Instructional Placards | Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment |
| Belts and Pulleys | 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings |
| Cushioning | Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability |
| Shrouds | Standard rear shroud on SE models; Optional full front shroud on SE models |
| Weight Plates and Guide Rods | Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models) |
| Adjustments | Roller mechanism on seat adjustment provides smooth operation |
| Foot Platforms | Polyethylene spray-coated for impact, corrosion, and abrasion resistance |
| Frame Description | Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity |
| Hand Grips | Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant |
Hammer Strength Select Seated Leg Curl:
The Hammer Strength Select Seated Leg Curl is a fundamental part of the strength training progression. Adjustable back and thigh pads for better alignment and stabilization, and adjustable start position provides five different starting points. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.
| Size (L x W x H) | 55" x 34" x 55" (metric cm: 140 x 86 x 140) |
| Recommended Live Area | 89" x 58" x 55" (metric cm: 226 x 147 x 140) |
| Machine Weight | 515 lb (234 kg) |
| Weight Stack(s) | 295 lb (138 kg) |
| Max User Weight | 300 lb (136 kg) |
| Cables | 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications |
| Instructional Placards | Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment |
| Belts and Pulleys | 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings |
| Cushioning | Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability |
| Shrouds | Standard rear shroud on SE models; Optional full front shroud on SE models |
| Weight Plates and Guide Rods | Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models) |
| Adjustments | Roller mechanism on seat adjustment provides smooth operation |
| Foot Platforms | Polyethylene spray-coated for impact, corrosion, and abrasion resistance |
| Frame Description | Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity |
| Hand Grips | Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant |
For a shipping quote, please message with:
1. Address
2. Commercial or Residential Location
3. Will you need a lift gate at delivery, or is there a loading dock, forklift, tractor, etc.?